You can either create your equipment pack by yourself or send us a Request, and we will assist you with that.
What to consider before creating an asset
The most challenging part of creating an asset is gathering the correct data and characteristics for that asset. Therefore, it is crucial to collect all the necessary data about the asset before commencing the creation process.
Below are a couple of examples of the data you need to create an asset:
Transformer & Inverter - a table from the manufacturer's spec
Combiner box - a table from the manufacturer's spec
Tracker - a screenshot from the DWG with all dimensions
PV-module - a table from the manufacturer's spec
It is important to mention that for inverters and PV-modules, the PV Farm App can parse your PAN and OND files, which are an industry standards for this equipment. You can find a couple of downloadable examples at the bottom of this article.
💡 Please, make sure to follow these guidelines:
Ensure that you have the latest data for your equipment (we recommend using technical documentation from the equipment manufacturer)
Take note of the distinctions between glass width/length and module width/length. The module width/length should encompass the module frame size. Please refer to the image displayed below:
When using the PVFarm App, utilise the module width/length dimensions, including the frame.
Verify that the tracker frame and PV module bin class are compatible, and confirm that the hole spacing is sufficient.
How to create an asset
The most effective approach for creating assets, excluding modules and inverters, is to modify existing equipment assets and save them as new ones. However, when it comes to PV modules or inverters, the ideal method is to upload a PAN or OND file. In case you don't have access to those files, we will guide you on alternative methods to create them.
Create a new PV Module
There are two options to add a new PV module
Upload a PV module as a PAN file.
Please dive into the article How to upload a PV Module or Inverter as a PAN/OND file for details.Create a new one manually based on a catalog's existing items.
Go to the Catalog view and select an existing PV module from the available options.
Insert the selected PV module into the 3D scene by placing it in the desired location.
Modify the properties of the PV module to match the specifications you have.
The PV module field is empty before you save a new item to the Catalog
Set up the mounting standard and match it with the tracker's frame mounting standard
for the standard value, use the model of PV modules you're going to match with the tracker frame
for example, the CS7N-TB-AG standard includes a pack of PV modules 685W, 690W, and 695W
Add → Add selected item to the catalog as .bimasset
Observe the new asset notification and the saved PV module appears in the properties
Save the Catalog version to make a new PV module available for your team.
Create a new Tracker
In the Tool Bar menu, select: Add > Tracker
Observe the tracker is added to scene
Select the tracker > Object details menu > module
Select the appropriate PV module that you wish to associate with the tracker. Ensure that you have the correct parameter values for the PV module, which can be obtained by referring to the Creating a new PV module block section.
Set up the parameters specific to the tracker
Object details > tracker_frame > string & dimensions
Dive into the Pile Positions menu to set up piles coordination according to the wind load position
Save the new tracker into the Catalog
Select the Tracker on the 3d view
In the Tool Bar menu, select: Add > Add selected item to the catalog as .bimasset
Make sure the Tracker is added to the Catalog
Combiner box
In the Catalog view, select an existing Combiner Box from the available options
Pay attention to the CB type, whether it is AC or DC, to ensure it aligns with your specific requirements
Add to scene
Modify the Combiner Box properties to match your specifications
Save it to the Catalog
Select the new Combiner Box on the 3d view
Project → Save as .bimasset to Catalog
Save the Catalog version as a new one
Inverter
Select the existing Inverter in the Catalog view
Pay attention to the Inverter type, whether it is a String or a Central one, to ensure it aligns with your specific requirements
Insert it on a 3d view
Modify the Inverter properties, taking into consideration both the 'inverter module' and the inverter assembly properties
Save it to the Catalog
Select the new Inverter on the 3d view
Project → Save as .bimasset to Catalog
Save the Catalog version as a new one.
Transformer
In the Catalog view, select an existing Transformer from the available options. Pay attention to the Transformer type, whether it is Skid or no-Skid, to ensure it aligns with your specific requirements.
For Skid Transformers: This indicates that the transformer and inverter are installed on a single foundation pad or frame.
Insert it on a 3d view
Adjust it with the properties based on your project specifications.
Save it to the Catalog
Select the new Transformer on the 3d view
Project → Save as .bimasset to CatalogSave the Catalog version as a new one.
Create a new Tracker Frame
In the Catalog view, select an existing tracker frame from the available options
Add to scene
Set up the parameters specific to the tracker frame
the module_mounting parameters are required
use them for Rack series (bin class) matching
for the standard value, use the model of PV modules you're going to match with the tracker frame
for example, the CS7N-TB-AG standard includes a pack of PV modules 685W, 690W, and 695W
for the module_width, use the width with the frame of the PV module according to the manufacturer's specs
Save the new tracker frame into the Catalog
Select the Tracker on the 3d view
Project → Save as .bimasset to Catalog
Save the Catalog with newly created equipment
Open the Catalog View in the application.
Locate the 'burger' menu icon (often represented by three horizontal lines) typically found in the top corner of the Catalog View.
Click on the 'burger' menu icon to expand the menu options, and then select the "Save" option.
After selecting "Save," ensure that the Catalog is saved with a version labeled as "a few seconds ago" or a timestamp reflecting the most recent changes made.
